Your web browser "Internet Explorer" is outdated and has not received any new features since 2016.
There will be display errors on this website!
The SW-WD-FS Weigh Cell series covers the weighing range up to 2,000 g. They have been specifically designed as compact sensor components, meaning they are especially suited for installation into multilane applications and everywhere where small frame sizes are demanded. By using a special construction, all Weigh Cells are suitable for Wash Down applications IP69K.
As a ready-to-connect installation component – in combination with a separate electronic system – the Weigh Cell supplies final weight values as a standard feature via a CAN, RS 422, Profibus DP, Profinet IO, Ethernet/IP or EtherCAT interface.
The integrated software filters can be configured in many ways, enabling optimal adaptation of the weighing system to the respective ambient conditions. The Weigh Cells extensive command set facilitates simplified control engineering integration. Complemented by a variety of options, the Weigh Cell can also fulfill very specific requirements.
The Active Vibration Compensation (AVC) can be added as an option.
You need an individual solution? Please contact us.
|Max. weighing range (g)||2,000|
|Display value (g)||0.05|
|Max. dead load range (g)||1.000|
|IP (protection class)||69K|
10: RS 422 instead of CAN interface
11: Bus operation (standard)
12: Higher display resolution
13: Binary I/O channels (standard)
14: Filling algorithm
19: Active Vibration Compensation (AVC)
25: Dead load compensation
35: Profibus DP instead of CAN interface
36: Ethernet/IP instead of CAN interface
37: Profinet IO instead of CAN interface
38: EtherCAT instead of CAN interface